uwot

library(uwot)
#> Loading required package: Matrix
library(RSpectra)

uwot is the a package for implementing the UMAP dimensionality reduction method. For more information on UMAP, see the original paper and the Python package.

We’ll use the iris dataset in these examples. It’s not the ideal dataset because it’s not terribly large nor high-dimensional (with only 4 numeric columns), but you’ll get the general idea.

The default output dimensionality of UMAP is into two-dimensions, so it’s amenable for visualization, but you can set a larger value with n_components. In this vignette we’ll stick with two dimensions. We will need a function to make plotting easier:

kabsch <- function(pm, qm) {
  pm_dims <- dim(pm)
  if (!all(dim(qm) == pm_dims)) {
    stop(call. = TRUE, "Point sets must have the same dimensions")
  }
  # The rotation matrix will have (ncol - 1) leading ones in the diagonal
  diag_ones <- rep(1, pm_dims[2] - 1)

  # center the points
  pm <- scale(pm, center = TRUE, scale = FALSE)
  qm <- scale(qm, center = TRUE, scale = FALSE)

  am <- crossprod(pm, qm)

  svd_res <- svd(am)
  # use the sign of the determinant to ensure a right-hand coordinate system
  d <- determinant(tcrossprod(svd_res$v, svd_res$u))$sign
  dm <- diag(c(diag_ones, d))

  # rotation matrix
  um <- svd_res$v %*% tcrossprod(dm, svd_res$u)

  # Rotate and then translate to the original centroid location of qm
  sweep(t(tcrossprod(um, pm)), 2, -attr(qm, "scaled:center"))
}
iris_pca2 <- prcomp(iris[, 1:4])$x[, 1:2]
plot_umap <- function(coords, col = iris$Species, pca = iris_pca2) {
  plot(kabsch(coords, pca), col = col, xlab = "", ylab = "")
}

Most of this code is just the kabsch algorithm to align two point sets, which I am going to use to align the results of UMAP over the first two principal components. This is to keep the relative orientation of the output the same across different plots which makes it a bit easier to see the differences between them. UMAP is a stochastic algorithm so the output will be different each time you run it and small changes to the parameters can affect the absolute values of the coordinates, although the interpoint differences are usually similar. There’s no need to go to such trouble in most circumstances: the output of umap is a perfectly useful 2D matrix of coordinates you can pass into a plotting function with no further processing required.

Basic UMAP

The defaults of the umap function should work for most datasets. No scaling of the input data is done, but non-numeric columns are ignored:

set.seed(42)
iris_umap <- umap(iris)
plot_umap(iris_umap)

Parameters

uwot has accumulated many parameters over time, but most of the time there are only a handful you need worry about. The most important ones are:

min_dist

This is a mainly aesthetic parameter, which defines how close points can get in the output space. A smaller value tends to make any clusters in the output more compact. You should experiment with values between 0 and 1, although don’t choose exactly zero. The default is 0.01, which seems like it’s a bit small for iris. Let’s crank up min_dist to 0.3:

set.seed(42)
iris_umap_md05 <- umap(iris, min_dist = 0.3)
plot_umap(iris_umap_md05)

This has made the clusters bigger and closer together, so we’ll use min_dist = 0.3 for the other examples with iris.

n_neighbors

This defines the number of items in the dataset that define the neighborhood around each point. Set it too low and you will get a more fragmented layout. Set it too high and you will get something that will miss a lot of local structure.

Here’s a result with 5 neighbors:

set.seed(42)
iris_umap_nbrs5 <- umap(iris, n_neighbors = 5, min_dist = 0.3)
plot_umap(iris_umap_nbrs5)

It’s not hugely different from the default of 15 neighbors, but the clusters are a bit more broken up.

There should be a more pronounced difference going the other way and looking at 100 neighbors:

set.seed(42)
iris_umap_nbrs100 <- umap(iris, n_neighbors = 100, min_dist = 0.3)
plot_umap(iris_umap_nbrs100)

Here there is a much more uniform appearance to the results. It’s always worth trying a few different values of n_neighbors, especially larger values, although larger values of n_neighbors will lead to longer run times. Sometimes small clusters that you think are meaningful may in fact be artifacts of setting n_neighbors too small, so starting with a larger value and looking at the effect of reducing n_neighbors can help you avoid over interpreting results.

init

The default initialization of UMAP is to use spectral initialization, which acts upon the (symmetrized) k-nearest neighbor graph that is in determined by your choice of n_neighbors. This is usually a good choice, but it involves a very sparse matrix, which can sometimes be a bit too sparse, which leads to numerical difficulties which manifest as slow run times or even hanging calculations. If your dataset causes these issues, you can either try increasing n_neighbors but I have seen cases where that would be inconvenient in terms of CPU and RAM usage. An alternative is to use the first two principal components of the data, which at least uses the data you provide to give a solid global picture of the data that UMAP can refine. It’s not appropriate for every dataset, but in most cases, it’s a perfectly good alternative.

The only gotcha with it is that depending on the scaling of your data, the initial coordinates can have large inter-point distances. UMAP will not optimize that well, so such an output should be scaled to a small standard deviation. If you set init = "spca", it will do all that for you, although to be more aligned with the UMAP coordinate initialization, I recommend you also set init_sdev = "range" as well. init_sdev can also take a numerical value for the standard deviation. Values from 1e-4 to 10 are reasonable, but I recommend you stick to the default of "range".

set.seed(42)
iris_umap_spca <-
  umap(iris,
    init = "spca",
    init_sdev = "range",
    min_dist = 0.3
  )
plot_umap(iris_umap_spca)

This doesn’t have a big effect on iris, but it’s good to know about this as an option: and it can also smooth out the effect of changing n_neighbors on the initial coordinates with the standard spectral initialization, which can make it easier to see the effect of changing n_neighbors on the final result.

Some other init options to know about:

  • "random": if the worst comes to the worst, you can always fall back to randomly assigning the initial coordinates. You really want to avoid this if you can though, because it will take longer to optimize the coordinates to the same quality, so you will need to increase n_epochs to compensate. Even if you do that, it’s much more likely that you will end up in a minimum that is less desirable than one based on a good initialization. This will make interpreting the results harder, as you are more likely to end up with different clusters beings split or mixed with each other.
  • If you have some coordinates you like from another method, you can pass them in as a matrix. But remember will probably want to scale them with init_sdev though.

dens_scale

The dens_scale parameter varies from 0 to 1 and controls how much of the relative densities of the input data is attempted to be preserved in the output.

set.seed(42)
iris_umapds <- umap(iris, min_dist = 0.3, dens_scale = 0.5)
plot_umap(iris_umapds)

This has shrunk the black cluster on the left of the plot (those are of species setosa), which reflect that the density of the setosa points is less spread out in the input data than the other two species. For more on dens_scale please read its dedicated article.

Embedding New Data

Once you have an embedding, you can use it to embed new data, although you need to remember to ask for a “model” to return. Instead of just the coordinates, you will now get back a list which contains all the extra parameters you will need for transforming new data. The coordinates are still available in the $embedding component.

Let’s try building a UMAP with just the setosa and versicolor iris species:

set.seed(42)

iris_train <- iris[iris$Species %in% c("setosa", "versicolor"), ]
iris_train_umap <-
  umap(iris_train, min_dist = 0.3, ret_model = TRUE)
plot(
  iris_train_umap$embedding,
  col = iris_train$Species,
  xlab = "",
  ylab = "",
  main = "UMAP setosa + versicolor"
)

Next, you can use umap_transform to embed the new points:

iris_test <- iris[iris$Species == "virginica", ]
set.seed(42)
iris_test_umap <- umap_transform(iris_test, iris_train_umap)
plot(
  rbind(iris_train_umap$embedding, iris_test_umap),
  col = iris$Species,
  xlab = "",
  ylab = "",
  main = "UMAP transform virginica"
)

The green points in the top-right show the embedded data. Note that the original (black and red) clusters do not get optimized any further. While we haven’t perfectly reproduced the full UMAP, the virginica points are located in more or less the right place, close to the versicolor items. Just like with any machine learning method, you must be careful with how you choose your training set.

Supported Distances

For small (N < 4096) and Euclidean distance, exact nearest neighbors are found using the FNN package. Otherwise, approximate nearest neighbors are found using RcppAnnoy. The supported distance metrics (set by the metric parameter) are:

Exactly what constitutes the cosine distance can differ between packages. uwot tries to follow how the Python version of UMAP defines it, which is 1 minus the cosine similarity. This differs slightly from how Annoy defines its angular distance, so be aware that uwot internally converts the Annoy version of the distance. Also be aware that the Pearson correlation distance is the cosine distance applied to row-centered vectors.

If you need other metrics, and can generate the nearest neighbor info externally, you can pass the data directly to uwot via the nn_method parameter. Please note that the Hamming support is a lot slower than the other metrics. I do not recommend using it if you have more than a few hundred features, and even then expect it to take several minutes during the index building phase in situations where the Euclidean metric would take only a few seconds.

Multi-threading support

Parallelization can be used for the nearest neighbor index search, the smooth knn/perplexity calibration, and the optimization, which is the same approach that LargeVis takes.

You can (and should) adjust the number of threads via the n_threads, which controls the nearest neighbor and smooth knn calibration, and the n_sgd_threads parameter, which controls the number of threads used during optimization. For the n_threads, the default is the number of available cores. For n_sgd_threads the default is 0, which ensures reproducibility of results with a fixed seed.

Python Comparison

For the datasets I’ve tried it with, the results look at least reminiscent of those obtained using the official Python implementation. Below are results for the 70,000 MNIST digits (downloaded using the snedata package). Below, is the result of using the official Python UMAP implementation (via the reticulate package). Under that is the result of using uwot.

MNIST UMAP (Python)

MNIST UMAP (Python)

MNIST UMAP (R)

MNIST UMAP (R)

The project documentation contains some more examples, and comparison with Python.

Limitations and Other Issues

Nearest Neighbor Calculation

uwot leans heavily on the Annoy library for approximate nearest neighbor search. As a result, compared to the Python version of UMAP, uwot has much more limited support for different distance measurements, and no support for sparse matrix data input.

However, uwot does let you pass in nearest neighbor data. So if you have access to other nearest neighbor methods, you can generate data that can be used with uwot. See the Nearest Neighbor Data Format article. Or if you can calculate a distance matrix for your data, you can pass it in as dist object.

For larger distance matrices, you can pass in a sparseMatrix (from the Matrix package).

Experience with COIL-100, which has 49,152 features, suggests that Annoy will definitely struggle with datasets of this dimensionality. Even 3000 dimensions can cause problems, although this is not a difficulty specific to Annoy. Reducing the dimensionality with PCA to an intermediate dimensionality (e.g. 100) can help. Use e.g. pca = 100 to do this. This can also be slow on platforms without good linear algebra support and you should assure yourself that 100 principal components won’t be throwing away excessive amounts of information.

Spectral Initialization

The spectral initialization default for umap (and the Laplacian Eigenmap initialization, init = "laplacian") can sometimes run into problems. If it fails to converge it will fall back to random initialization, but on occasion I’ve seen it take an extremely long time (a couple of hours) to converge. Recent changes have hopefully reduced the chance of this happening, but if initialization is taking more than a few minutes, I suggest stopping the calculation and using the scaled PCA (init = "spca") instead.

Supporting Libraries

All credit to the following packages which do a lot of the hard work: